A+ | A- | Reset
Home arrow Richmond City Code arrow Title VII - TRAFFIC CODEarrow Chapter 71: Traffic Rulesarrow 71.10 Required Position and Method of Turning
71.10 Required Position and Method of Turning at an Intersection
71.10 REQUIRED POSITION AND METHOD OF TURNING AT AN INTERSECTION
      
The driver of a vehicle intending to turn at an intersection shall do so as follows:
      
(a)        Right turns. Both the approach for a right turn and a right turn shall be made as close as practicable to the right-hand curb or edge of the roadway.
      
(b)        Left turns on two-way roadways. At any intersection where traffic is permitted to move in both directions on each roadway entering the intersection, an approach for a left turn shall be made in that portion of the right half of the roadway nearest the center line and by passing to the right of the center line where it enters the intersection and after entering the intersection to the right of the center line of the roadway being entered. Whenever practicable the left turn shall be made in that portion of the intersection to the left of the center of the intersection.
      
(c)        Left turns on other than two-way roadways. At any intersection where traffic is restricted to one direction on one or more of the roadways, the driver of a vehicle intending to turn left at any such intersection shall approach the intersection in the extreme left-hand lane lawfully available to traffic moving in the direction of travel of the vehicle and after entering the intersection the left turn shall be made so as to leave the intersection as nearly as practicable, in the left-hand lane lawfully available to traffic moving in the direction upon the roadway being entered. (‘72 Code, 41.33) (Ord. 1781-1960) Penalty, see 10.99
 
Statutory reference:
            Local authorities may regulate turns, see I.C. 9-4-1-28(A)


More Categories: